fish 1 final

Fish 1



    Please read my Terms of Use at the bottom of this tutorial. I hate having to state them, but in this day and age, it is necessary.

    This tutorial is the first in a series of three fish tutorials. The other two fish tutorials will have the fish turning so that you can use all three to make the fish swim around in a circle or ellipse as in a fish bowl or an aquarium. You can access the other two tutorials at the bottom of this page.

    I did the work for this tutorial in PSP version 9, but I am sure the technique would work in other versions as well. This is an Alpha Channel Selections tutorial, and I hope it is clear enough for anyone trying it. The canvas was saved as a psp, so it should also work in verson 8. Remember to save often.

    To do this tutorial, you will need a basic knowledge of PSP and my Fish 1 Canvas.


    Unzip the Fish 1 Canvas into a folder of your choice. I usually make a folder with the name of the tutorial and put the supplies in there for easy access.

    Remember to save often! You can save it as a pspimage in the folder of your choice. (This is another reason I have a folder with the name of the tutorial, so that I can also put my pspimages in it to save and "play" with later!)

    Step 1. Open the orng_fish_canvas_ssg.psp in your PSP workspace, duplicate it and close the original. I will give directions for the colors I used, which are on their own layer in the canvas, but feel free to color the fish with your choice of colors. You will notice there is a white background layer. I did this for ease in seeing the coloring of the image. You can change it or delete it as you want. My tutorials are only written the way I did them - and are suggestions for you. Use your imagination - get creative! : )

SAVE

    Step 2. Activate the top fin layer in the Layer Palette. Go to Selections/Load-Save Selections/Load from Alpha Channel. Load the top fin selection. Fill with color # 2. Go to Selections/Float. Go to Effects/3D Effects/Cutout. Use the following settings: V&H: 5; Opacity: 100; Blur: 20; Shadow color: #fc8c03. Reapply with the V&H at minus 5. Deselect by going to Selections/Select None or by holding down the Ctrl key and the D key on the keyboard.

fin cutout

SAVE

    Step 3. Activate the top fin lines layer. Load the top fin lines selection. Fill with color # 1. Deselect.

SAVE

    Step 4. Activate the body layer. Load the body selection. Fill with color # 2. Float and use the following Cutout settings: V&H: 10; Opacity: 100; Blur: 30; Shadow color: #fc8c03. Reapply with the V&H at minus 10. Deselect.

body cutout

    Step 5. Activate the body lines layer. Load the body lines selection. Fill with color # 4. Deselect.

SAVE

    Step 6. Activate the side fin layer. Load the side fin selection. Fill with color # 2. Float. Use the following Cutout settings: V&H: 5; Opacity: 100; Blur: 20; Shadow color: #fc8c03. Reapply with the V&H at minus 5. Deselect. We are using the same Cutout for both fins and the tail.

fin cutout

    Step7. Activate the side fin lines layer. Load the side fin lines selection. Fill with color # 1. Deselect.

SAVE

    Step 8. Activate the tail layer. Load the tail selection. Fill with color # 2. Float and use the following Cutout settings: V&H: 5; Opacity: 100; Blur: 20; Shadow color: #fc8c03. Reapply with the V&H at minus 5. Deselect.

fin cutout

    Step 9. Activate the tail lines layer. Load the tail lines selection. Fill with color # 1. Deselect.

SAVE

    Step 10. Activate the eye layer. Load the eye selection. Fill with black. Selections/Modify/Contract: 1. Fill on the same layer with white. Deselect. Effects/3D Effects/Inner Bevel. Use the following settings: Bevel: 2; Width: 15; Smoothness: 40; Depth: 1; Ambience: 0; Shininess: 80; Color: white; Angle: 315; Intensity: 25; Elevation: 40.

eye bevel

    Step 11. Activate the inner eye layer. Load the inner eye selection. Fill with black. Deselect. Apply the following Inner Bevel: Bevel: 2; Width: 14; Smoothness: 15; Depth: 12; Ambience: 0; Shininess: 50; Color: white; Angle: 222; Intensity: 70; Elevation: 30. This is the round preset with the angle changed.

 inner eye bevel

SAVE

    Step 12. Activate the eye lid layer. Load the eye lid selection. Fill with color # 1. Selections/Modify/Contract: 1. Fill with color # 2 on the same layer. Deselect. Apply the following Inner Bevel: Bevel: 2; Width: 15; Smoothness: 40; Depth: 1; Ambience: 0; Shininess: 80; Color: #ffb24e; Angle: 315; Intensity: 25; Elevation: 40.

 eye lid bevel

    Step 13. Activate the mouth layer. Load the mouth selection. Fill with black. Deselect.

SAVE

    Step 14. Activate the lower lip layer. Load the lower lip selection. Fill with color # 1. Selections/Modify/Contract: 1. Fill with color # 2 on the same layer. Deselect. Apply the following Inner Bevel: Bevel: 2; Width: 15; Smoothness: 40; Depth: 1; Ambience: 0; Shininess: 80; Color: #ffb24e; Angle: 315; Intensity: 25; Elevation: 40. This is the same Inner Bevel used on the eye lid.

 eye lid bevel

    Step 15. Activate the upper lip layer. Load the upper lip selection. Fill with color # 1. Selections/Modify/Contract: 1. Fill with color # 2 on the same layer. Deselect. Apply the same Inner Bevel we just used on the lower lip.

    Congratulations! Your Fish 1 is finished! You can now delete the colors layer, and do a final save. You can add a background and play with your image.

fish 1 final

    Thank you for trying my Fish 1 tutorial and I hope you enjoyed doing it.

      Thank you for trying this tutorial! If you would like to do the other two fish tutorials in this series of three, just click on the name of the tutorial.

      Fish 2 Tutorial


      Fish 3 Tutorial





      This tutorial was written August 8, 2009.

Terms of Use

    All the content on this Fish 1 Tutorial site is protected by International Copyright laws. If photos or graphics were created by anyone other than Susie, it will be noted and the copyright will remain with the creator. Please respect these copyrights. Any similarity to any other tutorial is coincidental. You may download my tutorials for personal use. You may share them within a group, if you write and ask my permission first. The image you create from this tutorial is yours to do with as you please. I worked hard to create this image and to write the tutorial - it took many hours, so please respect my work.



      Please feel free to contact me if you have any comments or questions. Send email to susie



Home